How to Sew Cartridge Pleats in 9 Steps

Cartridge pleats are hand-sewn, gathered fabric folds seen on skirts, collars, and sleeves. Cartridge pleating (also called gauging) is a hand-sewing method that involves tightly stacking layers of gathered fabric and attaching them to a garment. Sewists pleat the fabric into a figure-eight arrangement by hand and secure it to a garment, often a waistband, exposing the inside of the pleat. A go-to type of pleat for couture designs and historical sewing, you’re likely to see this detail on the waistband of women’s skirts, petticoats, or neck ruffs invoking Elizabethan attire. Follow these step-by-step instructions to construct your DIY garment featuring intricate cartridge pleats. 1. __Practice with fabric scraps__. Gathering thick fabric by hand can be difficult, but the more you practice, the better your garment will look. Purchase extra yards of fabric (or use scraps you have at home) and experiment with making beginner cartridge pleats before starting your first sewing project. If you are new to hand-sewing, construct your cartridge pleats on a separate piece of fabric, then attach them to the finished project (like the finished waistband of a skirt). Using this method allows you the flexibility to redo the pleats if needed before attaching them to your final product. 2. __Select your fabric__. Use structured fabric that matches the article of clothing onto which you’re attaching the pleats. The folds won't look as crisp if the [fabric type](https://www.masterclass.com/articles/28-types-of-fabrics-and-their-uses) is too soft or flimsy. 3. __Gather materials__. Gather the basic tools you’d need for any sewing project in your workspace, which may include sewing needles, tailor’s chalk, a [tape measure](https://www.masterclass.com/articles/how-to-read-a-tape-measure), pins, and thread (use a strong thread like upholstery thread). Lay your fabric out flat on your workspace, and prepare to cut it. 4. __Fold the edge of the fabric__. You’re supposed to see the front and back of your finished pleats, so you will need to fold the top of the garment’s fabric several inches over the raw edge of the pleats. This way, the front and back of each pleat will show the right side of the fabric. 5. __Leave a seam allowance__. If you are making a pleated waistband that you plan to attach to an article of clothing, leave a half-inch seam allowance on the top edge of the fabric, so you have space to attach it later. 6. __Measure and mark__. Use your measuring tape and chalk to make equally spaced marks on the fabric to mark where you will make your pleats. Once you pull the thread tight, the fabric will gather. Depending on how large your pleats are, you may need to make two to three rows of marks. 7. __Thread your pleats__. Add a running stitch through the fabric according to the dots you made with the chalk. 8. __Pull your gathering threads__. Pull the thread tight to cinch the gathering stitches. Your pleats should resemble the structure of an accordion. 9. __Finish and attach__. Make knots in the thread to keep the gathered fabric in place, and snip off the excess thread. Then, use a whip [stitch](https://www.masterclass.com/articles/types-of-hand-sewing-stitches) to attach the pleats to the top of the skirt or neckline you are embellishing. Become a better fashion designer with the [MasterClass Annual Membership](https://www.masterclass.com). Gain access to exclusive video lessons taught by the world’s best, including Laura Kim and Fernando Garcia, Diane von Furstenberg, Marc Jacobs, Tan France, Anna Wintour, and more. These step-by-step instructions will teach you how to add cartridge pleats to your own clothing.